Connecting The Monitor - Medion MD 8828 Manual

Connecting the Monitor

Diagram reference: N
Your PC is equipped with a VGA, DVI and a HDMI connector.
Note
Always only connect one data cable, in order to avoid problems with the
signal allocation, if your monitor has several inputs (e.g. VGA and HDMI).
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. Connect the data cable of the monitor to the socket on the graphics card (reference
N). If necessary, remove the white guard-ring on the monitor plug and ensure that
the plug and socket mate together precisely.
2. Hand-tighten the screws on the monitor cable.
Caution!
Your PC monitor is preconfigured for a screen resolution of 1024 x 768
pixels and an optimal refresh rate of 60 hz. If your monitor does not sup-
port these settings it may become damaged or malfunction during use. You
can change the screen resolution and configuration of your monitor as fol-
lows (See also your monitor's User Manual).
You will change the screen resolution in the Control Panel under Personalize appear-
ance and sounds.
The Program can be started in the following way:
•
Right mouse click on the Windows interface (Desktop) and a left mouse click on
Personalization.
•
Through Start
double clicking with the left mouse button.
After Sales Support
or
Control Panel Personalize appearance and sounds, by
TEL: 1 300 884 987 WEB Support: www.medion.com.au
19