Connecting The Monitor - Medion AKOYA MINI PC Manual

Connecting the Monitor

Diagram reference: F
Your AKOYA MINI PC is equipped with a DVI connector.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. Connect the data cable of the monitor to the socket on the graphics card (refer-
ence: F). If necessary, remove the white guard-ring on the monitor plug.
2. Hand-tighten the screws on the monitor cable.
Note
The AKOYA MINI PC monitor is preconfigured for a screen resolution of
1024 x 768 pixels and an optimal refresh rate of 60 hz. If your monitor
does not support these settings it may become damaged or malfunction
during use. You can change the screen resolution and configuration of
your monitor as follows (See also your monitor's User Manual).
16 English