Front Connectors; Connecting The Monitor - Medion Nettop Manual

Front Connectors

Diagram reference: D
Some connections are located behind the front flap. This offers you the great advantage of
creating frequently used connections quickly and conveniently, without turning the Net-
top PC round. The flap, which can be slid, also protects the connections.

Connecting the Monitor

Diagram reference: E
Your Nettop PC is equipped with a VGA connector.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. Connect the data cable of the monitor to the socket on the graphics card (reference
E). If necessary, remove the white guard-ring on the monitor plug and ensure that
the plug and socket mate together precisely.
2. Hand-tighten the screws on the monitor cable.
Caution!
Your Nettop PC monitor is preconfigured for a screen resolution of 1024 x
768 pixels and an optimal refresh rate of 60 hz. If your monitor does not
support these settings it may become damaged or malfunction during use.
You can change the screen resolution and configuration of your monitor as
follows (See also your monitor's User Manual).
You can change the screen resolution in the Control Panel under Display Properties.
The Program can be started in the following way:
•
Right mouse click on the Windows interface (Desktop) and a left mouse click on
Display Properties.
•
Through Start
the left mouse button.
or
Control Panel Display Properties, by double clicking with
Connecting
- 13 -