Code Search By Brand; Code Identification; Learning Function - Medion Remote Control Manual

Manual URC 4689 UK Apr05.fm Seite 4 Montag, 11. April 2005 12:00 12
6. As soon as the device does respond to the remote control, press OK.
7. Should you fail to press the OK key in time, you can step by step return to
the code to which the device has responded using the CHAN– key.
If you want the remote control only to send a new code every 3 seconds instead
of every second, proceed as follows:
Press and release CHAN+ (or PLAY or POWER) twice (see step 5). This will
give you more time, but the procedure will also take longer.

Code search by brand

This function provides you with the possibility of searching by brands. You will
find the brands in the code table under "Search code under brand name".
Proceed as follows:
1. Switch on manually the device you wish to control (TV, VCR etc ...).
2. Keep the SET key pressed for approx. 3 seconds until the LED indicator
lights continuously.
3. Release the SET key.
4. Briefly press the desired MODE key (TV, VCR, DVD, SAT, DSAT, CD, CBL,
AUX).
5. Enter the applicable one-digit code from brand code table „Search code
under brand name".
If you enter the digit „0", all brands will be searched.
6. Press the CHAN+ key (or, in case of video cassette recorders, POWER or
PLAY) until the device responds correctly. Proceed swiftly when doing
this, otherwise the automatic code search will be started.
7. Store the code by pressing the "OK" key.
If all codes have been searched, the LED will blink for about 3 seconds.

Code identification

The code identification allows you to identify codes that you have already
entered and that are memorised in the remote control. Proceed as follows:
1. Keep the SET key pressed for approx. 3 seconds until the LED indicator
lights continuously.
2. Release the SET key.
3. Briefly press the desired mode key (TV, VCR, DVD, SAT, DSAT, CD, CBL,
AUX). The LED blinks.
4. Briefly press the SET key. The LED blinks again.
5. To find the first digit, press each number key from 0 to 9 until the LED
turns off. The number you pressed is the first digit of the code. To
determine the second and the third number, repeat the procedure.
6. The LED will go out as soon as the key for the third number has been
pressed.
7. The code identification has now been completed.

Learning function

The universal remote control provides you with the possibility of manually
storing certain special functions which have not been stored, or even devices
which have not been included in the code list. To do this, the original remote
control of your device is required in any case. However, please note the
following tips beforehand in order to avoid any mistakes.
• Use new batteries for both remote controls.
• You can assign one remote control to each of the MODE keys.
4