Setting The Base; Activating/Deactivating Music On Hold; Activating Repeater Support; Protecting Against Unauthorised Access - Gigaset CX590 ISDN User Manual

Setting the base

You set the base with a registered
Gigaset C59H handset.
Activating/deactivating
music on hold
Ï
v ¤
¤ Audio Settings
¤ Music on hold
§Change§
Press to activate or deactivate the
music on hold (³ = on).
•
Activating repeater
support
You can increase the range and signal
strength of the base using a repeater. You
will need to activate repeater mode. This will
terminate any calls that are in progress at the
time.
Prerequisite: a repeater is registered.
Ï
v ¤
¤ System ¤ Repeater Mode
§Change§
Press to activate or deactivate
repeater mode (³= on).
Please note
u Eco Mode / Eco Mode+ (¢ page 53)
and repeater support cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode and Eco
Mode+.
u The encrypted transmission activated
at the factory is deactivated when a
repeater is registered.
•
Protecting against
unauthorised access
Protect the system settings of the base sta-
tion with a system PIN that only you know.
You must enter the system PIN when you
register/de-register a handset to/from the
base, for example, or when you restore the
default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN that only you know.
Ï
v ¤
¤ System ¤ System PIN
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Remove the power cable from the base.
Press and hold the register/paging key on
the base while you reconnect the power
cable to the base. Hold the key down for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
•
Resetting the base to the
default settings
When the settings are reset:
u Date/time are retained
u Handsets are still registered
u Eco Mode and Eco Mode+ are deacti-
vated,
u The system PIN is not reset.
Ï
v ¤
¤ System ¤ Base Reset
~
Enter the system PIN and press
§OK§
.
§Yes§
Press the display key.
Setting the base
§OK§
.
.
67