Gigaset CX590 ISDN User Manual page 59

Table of Contents

Advertisement

Using a handset as a room monitor
If you deactivate then reactivate the hand-
set, the room monitor remains activated.
Caution!
u Always check the operation of the
room monitor before use. For exam-
ple, test its sensitivity. Check the
connection if you are diverting the
room monitor to an external
number.
u Activating the function significantly
reduces the operating time of your
handset. Place the handset in the
base/charger, if necessary. This
ensures that the battery does not run
down.
u Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
pointed towards the baby.
u The connection that the room moni-
tor is diverted to must not be blocked
by an activated answering machine.
Activating the room monitor and
entering the destination number
É
v ¤
¤ Room Monitor
¤ You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: select the number
from the directory (press display key
or enter it manually.
Internal number: press the display key
¤ . Select the handset or Call All
§Change§
to call all registered handsets ¤
In idle status, the destination number or
the internal destination number is dis-
played.
Sensitivity:
Select the noise level sensitivity (Low or
High).
¤ Press
§Save§
to save the settings.
58
When the room monitor function is acti-
vated, the idle display looks like this:
i
INT 1
OFF
Changing the destination number
saved
v ¤
¤ Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
(¢ page 58).
Cancelling/deactivating the room
monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: the phone must support tone
dialling and the room monitor is set for an
ö
external destination number.
)
¤ Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
§OK§
.
after the call ends. There are no further room
monitor calls.
To reactivate the room monitor function
with the same phone number:
¤ Reactivate and save with
(¢ page 58).
V
07:15
Á
22 Oct
Room Monitor
0891234567
Options
É
¤ Room Monitor
§OFF§
to
§Save§

Advertisement

Table of Contents
loading

Table of Contents