First steps
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged
and discharged.
Please note
u After the first battery charge and discharge, you can replace your handset in
its base after every call.
u Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u The batteries may warm up during charging. This is not dangerous.
u After a while, the charge capacity of the batteries will decrease for technical
reasons.
12
¤ Place the handset in the base for ten hours.
¤ Then remove the handset
10 h
from the base and do not
replace it until the batteries
are fully discharged.