Table of Contents
Advertisement
Sending SMS (text messages)
SMS to PABXs
u You can only receive an SMS when Call-
ing Line Identification is forwarded to
the extension of the PABX (CLIP). The
CLIP of the phone number for the SMS
centre is evaluated in your Gigaset.
u Depending on your PABX, you may have
to add the access code (outside line code)
before the number of the SMS centre.
If in doubt, test your PABX, e.g., by send-
ing an SMS to your own number: once
with the access code and once without.
u When you send SMS messages, your
sender number may be sent without your
extension number. If this is the case, the
recipient cannot reply to you directly.
Sending and receiving SMS on ISDN PABXs
is only possible via the MSN number
assigned to your base.
50
Activating/deactivating SMS
function
If you deactivate the SMS function, you can-
not send or receive any further SMS mes-
sages with your phone.
The settings you have created for sending
and receiving SMS messages (i.e., the num-
bers of the SMS service centres) and the
entries in the incoming and outgoing lists
are saved even after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Q
§OK§
Deactivate the SMS function.
Or:
§OK§
Activate the SMS function
(default setting).
Advertisement
Table of Contents
