Wireless Slave Mode Setting - Samsung SEF-36PZF User Manual

WIRELESS SLAVE MODE SETTING

To properly control the wireless slave, it is
necessary to set the wireless slave mode settings
for the camera being used.
Set to SLAVE1 when using two flash units (p.37)
and to SLAVE2 for using built-in flash of camera and
a flash unit.
2 seconds
or more
❸
《42》
❷
■ Setting function
1
Slide the setting switch up.
2
Press the illumination button [LIGHT] for 2
seconds or more. SLAVE1 will be displayed.
3
Each time the Select button [S] is pressed, it
will switch in the order of SLAVE1 → SLAVE2
→ SLAVE1.
4
Press the illumination button to end the setting.
• In SLAVE 2, fluorescent lamps flicker may
contribute to flash unit's erroneous firing on
rare occasions.
❶