Standard Cmos Setup Page - MATSONIC MS6391E User Manual

Standard CMOS Setup Page

Use this page to set basic information such as the date and time, the
IDE devices, and the diskette drives. If you press the F3 key, the
system will automatically detect and configure the hard disks on
the IDE channels.
AMIBIOS SETUP – STANDARD CMOS SETUP
©2000 American Megatrends, Inc. All Rights Reserved
Date (mm/ dd/yy) : Mon May 22, 2000
Time (hh/mm/ss) : 14:26:53
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode
Pri Master : Auto
Pri Slave : Auto
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A : 1.44MB 3 1/2 "
Floppy Drive B : Not Installed
Month : Jan – Dec
Day : 01 – 31
Year : 1901 – 2099
Date & Time
Use these items to set the system date and time
Pri Master
Use these items to configure devices connected
Pri Slave
to the Primary and Secondary IDE channels. To
Sec Master configure an IDE hard disk drive, choose Auto. If
Sec Slave the Auto setting fails to find a hard disk drive, set
it to User, and then fill in the hard disk
characteristics (Size, Cyls, etc.) manually. If you
have a CD-ROM drive, select the setting
CDROM. If you have an ATAPI device with
removable media (e.g. a ZIP drive or an LS-120)
select Floptical.
Floppy Drive A
Use these items to set the size and capacity of
Floppy Drive B
the floppy diskette drive(s) installed in the
system.
3: BIOS Setup Utility
LBA Blk PIO 32Bit
On
On
On
On
ESC : Exit
éê
: Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
F3 : Detect All HDD
25