Installing The Mainboard In A Case - MATSONIC MS7057C User Manual

Installing the Mainboard in a Case

Most system cases have mounting brackets installed in the case,
which correspond to the holes in the mainboard. Place the
mainboard over the mounting brackets and secure the main-
board into the mounting brackets with screws. Most cases have
a choice of I/O templates in the rear panel. Make sure that the
I/O template in the case matches the I/O ports installed on the
rear edge of the mainboard.
This illustration
shows a mainboard
installed in a stan-
dard desktop case.
Note: Do not over-
tighten the screws
as this can stress
the mainboard.
This illustration
shows a mainboard
installed in a tower-
type case.
Power
Supply Unit
I/O
Template
Expansion
Slots
Power Supply Unit
I/O
Template
Expansion
Slots
18
Drive
Cage
Drive
Cage