Table of Contents
Advertisement
A standard configuration has already been set in the Setup Util-
ity. However, we recommend that you read this chapter just in
case you need to make any changes in the future.
This program should be executed under the following conditions:
When changing the system configuration
When a configuration error is detected by the system and
you are prompted to make changes to the Setup Utility
When resetting the system clock
When redefining the communication ports to prevent any
conflicts
When making changes to the Power Management con-
figuration
When changing the password or making other changes
to the security setup
Normally, running the Setup Utility is needed when the system
hardware is not consistent with the information contained in the
CMOS RAM, whenever the CMOS RAM has lost power, or the
system features need to be changed.
36
Advertisement
Table of Contents
