Connecting Auxiliary Components; Connecting The Power - Pioneer EV-5DVD Operation Instruction Manual

02 Connecting up
• Use a component video cable to connect
the COMPONENT VIDEO OUT to a set of
component inputs on your TV.
P P
R
B
Y VIDEO OUT
COMPONENT VIDEO OUT
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Compatibility of this player with
progressive-scan and high-definition TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.

Connecting auxiliary components

This system has stereo analog inputs which
you can use to connect external components,
such as a VCR, MD player, or your TV.
• Connect the LINE IN jacks on the rear
panel to an auxiliary playback component.
Connect using RCA pin-plug stereo cables.
Note
1 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti-
facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the 'standard definition' output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
12
En

Connecting the power

After making sure that everything is connected
properly, plug in the power cord to the AC inlet,
and the other end to a mains power outlet.
COMPONENT
INPUT
Congratulations! You're done setting up.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull
out the plug by tugging the cord and never
touch the power cord when your hands are wet
as this could cause a short circuit or electric
shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it
with other cords. The power cords should be
routed such that they are not likely to be
stepped on. A damaged power cord can cause
a fire or give you an electrical shock. Check the
power cord once in a while. When you find it
damaged, ask your nearest PIONEER
authorized service center or your dealer for a
1 replacement.