Attaching The Non-Skid Pads; Removing The Speaker Grilles - Pioneer EV-5DVD Operation Instruction Manual

Before you start

Attaching the non-skid pads

EV7DVD/EV9DVD model only
Use the self-adhesive non-skid pads to provide
a stable base for the speakers. Attach four to
each speaker or stand as shown below.
Center speaker
EV7DVD only – If you choose to use the Front
surround 3-spot setup (as explained in Home
theater sound setup on page 21), we
recommend using the speaker stands provided
(instead of attaching the pads to the base of
the surround speakers). Using the speaker
stands for the Standard surround 5-spot setup
is optional. See Attaching the surround
speakers to the speaker stands on page 10 for
more on this.
Speaker stands
Surround speaker
(EV7DVD only)

Removing the speaker grilles

If necessary, remove the front and (EV9DVD
only) surround speaker grilles as described
below.
1 Gently ease the grille loose by gripping
the bottom and pulling towards you.
2 Pull the top free in the same way.
When reattaching, start from the top then
push the bottom in until secure.
• It is not recommended (due to dirt and
dust) to leave the speaker grilles removed.
• Do not install your speakers overhead on
the ceiling or wall. If improperly attached,
the speaker grille can fall and cause
damage or personal injury.
01
7
En