06
Home theater sound
Using Front Surround
The Front Surround mode is effective when you
are using the Front surround 3-spot speaker
setup as described in Home theater sound
setup on page 21.
• EV7DVD model – The surround speakers
should be placed on top of the front
speakers and oriented (about 60º) towards
the walls (as a guide, line up the edge of
the speaker stand base with the front edge
of the speaker as shown below).
Left surround
60º
Left front
• EV9DVD model – The surround speakers
should be placed beside the front speakers
and oriented (about 60º) towards the walls.
Left surround
60º
Left front
SOUND MODE
•
Press FRT.SURR to select the Front
Surround mode.
Note
1 When you disconnect them it reverts to the previous mode.
24
En
Right surround
Right front
Right surround
Right front
TUNE
RETURN
SFC
SURROUND
FRT.SURR
EXT PWR
Using the Extra Power mode
The Extra Power mode uses the Front surround
3-spot speaker setup as described above, but
the surround speakers should be pointed in the
same direction as the front speakers (towards
the listening position).
•
Press EXT PWR to select the Extra Power
mode.
Listening in stereo
60º
You can listen to any source—stereo or
multichannel—in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.
•
Press SURROUND repeatedly until
STEREO shows in the display.
Listening with headphones
60º
When headphones are connected, only the
STEREO mode is available.
RETURN
SOUND MODE
TUNE
SFC
SURROUND
FRT.SURR
EXT PWR
SOUND MODE
TUNE
RETURN
SFC
SURROUND
FRT.SURR EXT PWR
1