Getting Started; Setting The Clock; Using The Remote To Control Your Tv; Using The On-Screen Displays - Pioneer EV-5DVD Operation Instruction Manual

Getting started

Chapter 4
Getting started

Setting the clock

Setting the clock allows you to use the timer.
1 Press TIMER.
• EV7DVD/EV9DVD:SHIFT + CLEAR:
KARAOKE
AUDIO SUBTITLE ANGLE
7 8 9
ECHO
TIMER ZOOM
0
CLEAR ENTER
TUNE
SYSTEM SETUP TOP MENU
MENU
HOME
MENU
ST ENTER ST
TEST CH
TONE LEVEL
SOUND MODE TUNE RETURN
• EV5DVD: SHIFT +9 :
3
4 5 6
KARAOKE
TIMER
7 8 9
ECHO
0
CLEAR ENTER
SYSTEM SETUP TUNE
TOP MENU
MENU
HOME
MENU
ST
ST ENTER
SOUND
MODE RETURN
TUNE
2 If 'CLK ADJ?' isn't in the display, select it
with or , then press ENTER .
3 Use / to set the hour. Press ENTER .
4 Use / to set the minute then press
ENTER to confirm.

Using the remote to control your TV

EV7DVD/EV9DVD model only
You can set up the supplied remote to control
your TV using the TV CONTROL buttons.
Note
1 The default setting is 12-hour format. See Optional system settings on page 48 to change it.
2 • The default setting is for a Pioneer TV.
• Note that there are also cases where the codes listed for a manufacturer in the Preset Code List may not work for your TV.
1
INPUT CHANNEL VOLUME
MUTE
SHIFT
VOLUME
MUTE
1 2 3
SHIFT
VOLUME
2
1 Switch on your TV.
2 Find the name of the manufacturer of
your TV in the Preset Code List on page 60.
Next to each manufacturer is one or more
three digit codes. These tell the remote what
kind of TV you have.
If the name of the manufacturer of your TV
does not appear in the table, you won't be able
to set up this remote to control your TV.
3 Point the remote at your TV, hold down
the CLEAR button, then enter the three
digit code for your TV.
The remote transmits an on/off signal to the TV.
If you've entered the correct code, your TV
should switch off.
If your TV doesn't turn off, repeat the procedure
using the next code in the list until your TV
switches off successfully. Once set, you can
then use the individual TV controls shown
below.
Button What it does
Switches your TV on or into
standby.
CHANNEL +/– Changes the TV channel.
VOLUME Adjusts the volume.
INPUT
Switches the TV's input
between the built in TV tuner
and an external video source.

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
04
17
En