Listening To The Radio; Improving Fm Stereo Sound; Listening To Other Sources; Dimming The Display - Pioneer EV-5DVD Operation Instruction Manual

04 Getting started

Listening to the radio

The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don't have to manually
tune in every time you want to listen (see More
tuner features on page 37 for more on this).
1 Press TUNER ( FM/AM ) to switch to the
tuner, then press repeatedly to select the AM
or FM band.
The display shows the band and frequency.
2 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
• High-speed tuning: Press and hold TUNE
+/– until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.

Improving FM stereo sound

If you're listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
• Press MONO ( SHIFT +6) to choose 'FM
MONO?' then press ENTER .
The MONO indicator lights when the tuner is
in mono reception mode.
Select FM AUTO? above to switch back to auto-
stereo mode (the STEREO indicator lights
when receiving a stereo broadcast).
20
En

Listening to other sources

You can connect an external source for
playback through this system's speakers. See
Connecting auxiliary components on page 12
for more on this.
• To connect a USB device to the USB
terminal, see USB playback on page 32.
1 Make sure that the external source (TV,
MD player, etc.) is switched on.
2 Press LINE to select the source connected
to the rear panel LINE input.
3 If necessary, start playback of the source.

Dimming the display

You can choose one of two brightness settings
for the front panel display.
1 Press SYSTEM SETUP ( SHIFT + HOME
MENU ) and use
then press ENTER .
2 Use to choose LIGHT or DARK then
press ENTER to confirm and exit.
The DARK setting also switches off the front
panel X.BOOM LED.
to choose DIMMER