Silvercrest SL 80/2 100CI Operation And Safety Notes page 98

Poor image, blocking
error, formation of
small blocks, sound
stops
No image, no sound,
signal strength and
signal quality OK
System crash (receiver
can no longer be
operated.)
The remote control
does not work
Channel has received
new frequency and is
no longer transmitted
with the current data.
Exit favourites list.
The antenna is not directed exactly towards the
satellite.
Align the antenna more precisely. For this purpose,
use the SIG key on the remote control. The signal
strength will be displayed for directing the antenna
properly.
The LNB is defective. Replace the LNB.
The satellite antenna has been directed to a wrong
satellite.
Should it come to the improbable case of a system
crash, separate the receiver from the mains supply.
Connect it again after 10 seconds. This can usually
solve the problem.
Please note: A software crash is not a malfunction
and no guarantee will apply. For technical
equipment (e.g. also PC, radio network, etc.) a
system crash can be solved simply and quickly by
following this procedure.
The batteries are exhausted.
Replace the batteries.
The remote control is not directed properly.
Aim the remote control towards the front side of the
receiver and ensure that there is no obstacle
between the remote control and the receiver.
Delete the corresponding channel and initiate an
automatic scan.
Press TV/RAD key.
- 95 -