Silvercrest SL 80/2 100CI Operation And Safety Notes page 35

If you would like to add a new satellite or to delete one, please follow the
steps given below:
Add:
Mark the item "Select satellite" and press the OK key (14). A satellites list
editor opens up.
Press the green key (18).
Press the OK key (14) to rename the new satellite.
A virtual keyboard appears on which you can enter the desired characters by
using the arrow keys (10-13).
Use the red key (17) to delete the default name "new Sat 11".
Move the blue cursor by using the arrow keys left (10), right (11),
up (12) and down (13) to enter the desired letters or the desired
number and confirm your input by using the OK key (14).
Confirm the selected characters by using the OK key (14).
With the menu key (8) confirm the input and close the virtual keyboard.
Press the arrow key down (13) to reach the item "Orbit Position in ° ".
To enter the orbital position, press the OK key (14) and enter the number of
degrees by using the numerical pad (3).
Press the "OK" key (14) to confirm the input.
Press the arrow key down (13) to reach the item "West / East".
Adjust the orientation by pressing the arrow key left (10) or right (11).
Press the menu key (8) to feed the new satellite and to return to the
antenna settings.
- 32 -