Silvercrest SL 80/2 100CI Operation And Safety Notes page 31

Time setup
In this sub-menu, you can enter the region and thus the time (time zone) of
your location. The receiver finds out the clock time automatically as soon it
finds a satellite signal.
To reach the sub-menu, press the OK key (14).
Region
Select the country in which you operate the receiver.
Switch over to the country by pressing the arrow key right (10) or left (11) on
the remote control.
or
Press the OK (14) button on the remote control. A selection window opens
up.
Use the arrow keys up (12) and down (13) to move the blue bar to select
the desired language of the country.
Press the "OK" key (14) to confirm your selection.
GMT offset
The time is changed informally according to the selected country. A manual
change is not possible.
Summertime
You can set here the time between "Summer time On" and "Summer time Off
(Winter time)".
Adjust the summer time by pressing the arrow key right (10) or left (11) on
the remote control.
To go to the previous menu, press the menu key (8) on the remote control.
or
Press the Exit key (9) to terminate the basic installation.
- 28 -