DiSEqC
Select whether the DiSEqC function should be switched on or off.
Press the arrow keys left (10) or right (11) to change the setting. You have
the option of selecting from
A, B, C, D, DiSEqC 1.2, Tone A, Tone B and Off.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the "OK" key (14).
Motor settings
You can use this item to change or define the motor control setting, if your
satellite set has a motor.
This function can be changed only if "DiSEqC 1.2" is selected.
Press the "OK" key (14). The "Motor control setting" menu appears.
Select position
You can store up to 64 motor positions.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
- 38 -