Silvercrest SL 80/2 100CI Operation And Safety Notes page 40

Caution!
For a single cable solution for the antenna system, this function must
be switched off, otherwise it may cause damage.
22 kHz
Select whether the 22 kHz setting should be switched on or off.
This function can be changed manually, only if the LNB type
"Standard" is selected.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the "OK" key (14).
- 37 -