Silvercrest SL 80/2 100CI Operation And Safety Notes page 85

SHDD power down
You can set the time when the hard disc should switch to the Sleep mode.
Press the arrow keys left (10) or right (11) to change the setting.
or
Press the "OK" key (14). A selection window appears.
Select the desired setting by using the arrow keys up (12) or down (13).
Confirm your selection by pressing the "OK" key (14).
Note that it will need a few seconds to switch over from the Sleep mode
back to active mode. This can be relevant in case of a direct recording.
HDD information
Let the hard disc information be displayed. You will find here the capacity of
the hard disc and the remaining data volume.
Press the OK key (14) to display the hard disc information.
To return to the main menu, press the Menu key (8).
or
Press the Exit key (9) to exit the menu completely.
- 82 -