Silvercrest SL 80/2 100CI Operation And Safety Notes page 44

Go to reference
The motor gets its orientation through a reference point. This point is the
position 0.
Press the "OK" key (14). The motor rotates back to the position 0.
Select TP
You can make a manual selection of the transponder. Various numbers of
transponders are preset according to the selected satellites.
Press the arrow keys left (10) or right (11) to select one of the preset
transponders.
or
Press the OK key (14) to reach the Transponders List editor.
Please read the item Transponder-List editor on the pages below.
Signal intensity
The signal intensity (strength) based on the reception strength is displayed
here graphically and numerically.
Signal quality
The signal quality based on the reception quality is displayed here graphically
and numerically.
Press the menu key (8) to save the settings. You go back one page in the
menu.
or
Press the Exit key (9) to reject the settings. You will exit the menu
completely.
- 41 -