Transmission And Error Reports; Transmission Speed; Size Compression; Fax Journal - Philips M3 User Manual

Philips fax machine
Table of Contents

Advertisement

Transmission and error
reports
Your fax machine can print a transmission report
every time you have sent a document. This way
you are given confi rmation that your document
has been received. If an error occurs during
transmission you will be informed on the error
report. The printing of a transmission report can
be switched on and off while the error report is
always printed.
1 Press MENU, 28 and OK.
2 Select with u and confi rm with OK.

Transmission speed

Your fax machine automatically adjusts its trans-
mission speed to the quality of the telephone line.
Especially in case of overseas transmissions this
process can take more time. If the poor line qual-
ity is already known it is useful to set the machine
at a slower speed from the very beginning. This
will save time and charges the automatic adjust-
ment would require.
1 Press MENU, 21 and OK.
2 Select a lower speed with u.
3 Confi rm with OK.

Size compression

To make sure that received faxes that are slightly
longer than A4 size are printed on one page,
these pages are slightly reduced vertically. If you
do not wish to use this facility, you can switch off
reduction using function 29:
1 Press MENU, 29 and OK.
2 Select with u and confi rm with OK.

Fax journal

The fax journal is a list of the last ten received
and transmitted faxes.
1 Press MENU, 27 and OK.
2 Select with u if, and when the fax journal
will be printed out (immediately or after ten
transmissions).
3 Confi rm your choice with OK.
20

Polled reception

By means of this function documents which
have been prepared for collection from another
fax machine can be retrieved.
Quick polling
1 Dial the desired number with the handset re-
placed.
2 Press and hold START.
3 In case you want to enter a sub address or a
code as well (check polling with code) enter
the telephone number fi rst and close with R.
Attach desired sub address or code, press and
hold START (e.g. 12345 R 17 R
code or 12345 RR code).
Polling with code
If your correspondent has entered a code to pro-
tect the document to be retrieved please follow
this procedure:
1 Press MENU, 22 and OK.
2 Enter the code and confi rm with OK.
3 Enter the telephone number and press
START. In case it does not work try to poll
manually: Lift the handset or press DIAL /
l, dial the required number and then press
START.
Polling send
You can allow a document to be polled from your
fax machine.
1 Insert the document in the document feed
slot.
2 If you wish to protect the document from un-
authorised access, enter a code with function
23.

Advertisement

Table of Contents
loading

Table of Contents