Setting Up The Unit Before Use; Date And Time; Dialling Mode; Storing Your Area Code - Panasonic KX-TS560ML Operating Instructions Manual

Integrated telephone system
Table of Contents

Advertisement

Preparation
Setting up the unit before
use

Date and time

1
>
{FUNCTION}
CLOCK ?"
>
{ENTER}
2
Enter the current year by selecting 2 digits.
Example: 2008
{0} {8}
≥ You can set the year 2000 to 2099.
3
{ENTER}
4
Enter the current hour and minute by
selecting 2 digits for each.
5
{ENTER}
≥ If numbers between 0000 and 0059, or
1300 and 2359 are entered, the time will
automatically set using the 24-hour clock.
Skip steps 6 and 7, and go to step 8.
6
Press {
} to select "AM", "PM" or
#
24-hour clock.
Display
AM
PM
(Blank display)
≥ Each time you press {
change on the display.
Example: 9:30PM
{0} {9} {3} {0}
"09:30PM" is displayed.
7
{ENTER}
8
Enter the current date and month by
selecting 2 digits for each.
Example: 15 July
{1} {5} {0} {7}
9
>
{ENTER}
{EXIT}
≥ If the date and time entered are wrong,
ERROR" will be displayed and you cannot
"
12
/
4
3
}: "SET
{
}
{
Option
AM
PM
24-hour clock
#
}, the selection will
>
Press {
} until
#
continue with the setting. Enter the correct
date and time.
For Caller ID service users (page 21)
If a time display service is available with
the Caller ID service:
≥ The Caller ID information will re-set the clock
after the ring if:
s the adjusted time and/or date is incorrect.
s the time adjustment set to ON.

Dialling mode

If you cannot make calls, change this setting
according to your telephone line service.
The default setting is "TONE".
"TONE": For tone dial service.
"PULSE": For rotary/pulse dial service.
1
>
{FUNCTION}
MODE ?"
>
{ENTER}
2
/
4
3
}: Select the desired setting
{
}
{
>
{ENTER}
{EXIT}

Storing your area code

We recommend storing your area code
before using Caller ID (page 21). Calls from
the same area will be recorded in the caller
list without the area code. You do not have
to remove it before calling back the caller.
≥ To store the caller's information in the
phonebook, you may need to remove the area
code because same area code would be
appeared automatically while storing.
1
>
{FUNCTION}
CODE ?"
>
{ENTER}
2
Enter your area code (8 digits max.).
Example: 092
{0} {9} {2}
≥ To correct a digit, press {CLEAR}. Enter
the correct number.
3
>
{ENTER}
{EXIT}
To erase your area code
1
>
{FUNCTION}
CODE ?"
>
{ENTER}
2
>
{CLEAR}
{ENTER}
}: "SET DIAL
/
4
3
{
}
{
}: "SET AREA
/
4
3
{
}
{
}: "SET AREA
/
4
3
{
}
{
>
{EXIT}
>

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents