Getting Started - Panasonic KX-TVP50E Manual

Introduction
The Panasonic Voice Processing System (VPS) is a powerful tool used to
manage your voice communications and increase your productivity through the
use of your voice mailbox. As a subscriber (the owner of a VPS mailbox), you
can:
• Send a message to one or more people inside or outside of your office.
• Transfer messages (with your annotation) to other VPS subscribers.
• Receive messages from any touch-tone telephone.
• Be called at an outside telephone or be notified through your beeper
(pager), when there are messages stored in your mailbox.
• Be notified by the message-waiting lamp on your extension that there are
messages stored in your mailbox.
• Screen your calls.
• Automate the handling of callers.
• And more...

Getting Started

Numbers to Know
You must have the following information before you begin:
• The extension number(s) of the VPS.
• Your mailbox and extension number.
• The System Manager's phone number.
Basic Steps
When using your mailbox for the first time, you must read "Section 1:
Mailbox Setup" and perform the key setup procedures described. You must
customise your mailbox before sending or receiving messages.
Identify yourself as the owner of your mailbox by setting the following:
• Recording Personal Greetings
• Recording Your Name
• Setting Your Password
!!
!!
• This symbol identifies important notes about the operation being
described.
• The voice prompt will guide you in every step of programming.
Note: In this manual, the suffix of each model number is omitted.
2 Introduction
Thank you for purchasing the Panasonic Model
KX-TVP50 Voice Processing System.