Table of Contents
Advertisement
8. Programmable Features
8.5.1 Programmable functions
{j/OK}
{C}
{>}{e}{v}
Helpful hints:
L To exit programming, press {ih} at any
time.
8.5.2 Alarm
Setting alarm
An alarm will sound for 3 minutes at the set time
once or daily.
Set the date and time beforehand (page 25).
1. Press {j/OK}.
2. Select "Handset Setup", then press {>}.
3. Select "Time Settings", then press {>}.
4. Select "Alarm", then press {>} 2 times.
5. Select an alarm mode, then press {>}.
– "Once": The alarm will sound once at the
set time. Enter the desired day and month
by selecting 2 digits for each.
– "Daily": An alarm will sound daily at the
set time.
– "Off" (default): Turns the alarm OFF.
Press {>} again, then press {ih} to
finish.
6. Enter the desired hour and minute by
selecting 2 digits for each.
L You can select "AM", "PM" or 24-hour
time entry by pressing {*} repeatedly.
7. Press {j/OK}.
8. Select the ring tone that will sound at the set
time, then press {>}.
9. Select "Save", then press {>}.
10. Press {ih}.
Note:
L To stop the alarm, press any dial key.
L When the handset is in talk or intercom
mode, the alarm will not sound until the call
has ended.
L Alarm volume depends on handset ringer
volume (page 24).
76
L The alarm will sound at the set time even
L If you select "Once", the setting will be
8.5.3 Ringer options
Changing ring tones
{ih}
You can choose the ring tone used by the
handset.
"Ext. Ringtone": Selects the ring tone for
outside calls.
"Int. Ringtone": Selects the ring tone for
intercom calls.
1. Press {j/OK}.
2. Select "Handset Setup", then press {>}.
3. Select "Ringer Setup", then press {>}.
4. Select the desired item, then press {>}.
5. Select the desired ring tone, then press {>}.
6. Press {ih}.
Note:
L If you select one of the melody ring tones, the
L The preset melodies in this product are used
L To set the base unit ring tone, see feature #17
8.5.4 Night mode
Night mode allows you to select a block of time
during which the handset will not ring for outside
calls. This feature is useful for times when you do
not want to be disturbed, for example, while
sleeping.
Using the handset phonebook's category feature
(page 32), you can also select categories of
callers whose calls will override night mode and
ring the handset (Caller ID users only).
Set the date and time beforehand (page 25).
Note:
L The base unit will ring regardless of this
Setting night mode ON/OFF
1. Press {j/OK}.
2. Select "Handset Setup", then press {>}.
3. Select "Ringer Setup", then press {>}.
4. Select "Night Mode", then press {>}.
5. Select "On/Off", then press {>}.
when the ringer is turned OFF.
changed to "Off" after the alarm sounds.
ring tone will continue to sound for several
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one
on the line when you answer a call.
with permission of © 2004 M-ZoNE Co., Ltd.
on page 68.
setting.
Advertisement
Table of Contents
