Editing A Caller's Telephone Number Before Calling Back - Panasonic KX-FC235E Operating Instructions Manual

4. Telephone
4.7.2 With the base unit
The display will show the number of new calls in
standby mode.
Example:
{CALLER ID}
{STOP}
{DIGITAL SP-PHONE}
{FAX/START}
1
Press {CALLER ID}.
2
Press {B} to search from the most recently
received caller information.
L If you press {A}, the display order will be
reversed.
3
Press {DIGITAL SP-PHONE} to return the
call.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
To change the way caller information is
displayed
Press {CALLER ID} repeatedly after step 2.
Example:
L A Q on the display means the item has
already been viewed or answered.
Display while viewing
When the unit could not receive a name, the
display will show "NO NAME RCVD".
To stop viewing
Press {STOP} after step 2.
38
10 NEW CALLS
10:59
{A}{B}
SAM LEE
20 Jul 11:20
,
b
1345678901
20 Jul 11:20
,
4.8 Editing a caller's
telephone number before
calling back
L Keep the front cover page open for button
locations.
4.8.1 With the handset
1
Press {j/OK}.
2
Select "Caller List", then press {>}.
3
Press {e} or {v} repeatedly to display the
desired item.
4
To add a number
Press the dial key ({0} to {9}).
L The number you pressed is added to the
top of the current number.
To erase a number
Press {j/OK}, select "Edit and Call",
then press {>}.
Press {<} or {>} to place the cursor on the
number you wish to erase, then press {C/T}.
5
Press {C} or {s}.
4.8.2 With the base unit
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {CALLER ID} repeatedly to display
the telephone number.
4
To insert a number in front of the telephone
number, press the desired dial key ({0} to
{9}).
L You can also initiate the editing mode by
pressing {*}.
5
Press {DIGITAL SP-PHONE} to call back
the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect number.
2. Press {STOP} to delete the number.
3. Enter the correct number.