Display - Panasonic Diga DMR-PWT500 Operating Instructions Manual

∫ Digital Audio Output
Sound
Digital Audio Output
Digital Audio Output
PCM Down Conversion
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
BD-Video Secondary Audio
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
≥It will be converted to 48 kHz regardless of the
setting in the following cases.
–The signals have a sampling frequency of over
96 kHz.
–The disc has copy protection.
–"BD-Video Secondary Audio" is set to "On".
([BD-V])
≥If "Off" is selected, signals are output as 96 kHz
≥If "On" is selected, signals are converted to
48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of
96 kHz.)
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
Select the audio signal to output.
≥Select "PCM" when the connected equipment
cannot decode the respective audio format.
≥Not making the proper settings may result in
noise.
BD-Video Secondary Audio
([BD-V] with secondary audio)
Turn on/off the clicking sound on the menu and
audio with secondary video.
If "Off" is selected, the primary audio only is output.
∫ Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.

Display

Display
Setup
On-Screen Information
Unit's Display
Screen Saver
Blue LED
Display
∫ On-Screen Information
Select the approximate time until the channel
information screen ( 26) disappears automatically.
∫ Unit's Display
Changes the brightness of the unit's display.
∫ Screen Saver
This is to prevent burn-in on the screen.
≥If "On" is selected, the masked-off area on the
screen becomes grey.
Depending on the condition of the unit (Connection,
Setting) the masked-off area on the screen becomes
grey.
∫ Blue LED
Set the lighting method for the lamp on the SD card
slot.
≥If "SD inserted" is selected, when this unit is turned
on and SD card is inserted, the lamp is lighted.
79
VQT3C81