Basic Connection - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Basic Connection

3D programmes can be played back when this unit is connected to a 3D compatible TV using a High
Speed HDMI cable.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Other amplifier connections (
≥When using Communication Camera (
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 5
To household mains socket
(AC 220 to 240 V, 50 Hz)
Connect only after
all other
connections are
complete.
AC IN
This unit's rear panel
Required setting:
Set "HDMI Audio Output" to "On" (
(The default setting is "On".)
After completing the connections, proceed to Easy Setting (
≥ Keep the RF coaxial cables as far away as possible from other cables.
≥ Do not roll up the RF coaxial cables.
10
VQT3C81
90)
65)
RF IN RF OUT
HDMI
AV OUT
Aerial cable
HDMI cable
81).
TV's rear panel
RF IN
HDMI
To the aerial
RF Coaxial cable (supplied)
AC mains lead (supplied)
13).