Network Connection - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Basic Connection

Network connection

Following functions will be available when this unit is
connected to the network.
≥DLNA functions (
≥Network Service functions (
≥BD-Live functions with Internet (
≥Updating the software (firmware) of this unit from
Internet ( 87)
For details about connection method, refer to the
instructions supplied with the connected equipment.
LAN (ethernet) cable connection
This unit's rear panel
10BASE-T/
100BASE-TX
Internet
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
12
VQT3C81
68)
65)
39)
LAN
LAN cable
(Straight)
Broadband router,
etc.
Wireless LAN connection
≥Wireless LAN is built in.
This unit
Wireless router,
etc.
≥ For up to date compatibility information on your Wireless
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN
services provided in airports, stations, cafes etc.
∫ Precautions of Wireless LAN connection
The following limits are in place regarding the usage
of this unit. You must be aware of these limits before
using this unit.
Panasonic will in no way be responsible for any
incidental damage which may arise due to a failure to
obey these limits, or to any condition of use or disuse
of this unit.
≥Data transmitted and received over radio waves
may be intercepted and monitored.
≥This unit contains delicate electronic components.
Please use this unit in the manner in which it was
intended and follow the following points:
–Do not expose this unit to high temperatures or
direct sunlight.
–Do not bend, or subject this unit to strong impacts.
–Keep this unit away from moisture.
–Do not disassemble or alter this unit in any way.
Internet