Panasonic Diga DMR-PWT500 Operating Instructions Manual page 93

Blu-ray disc player / hdd recorder
Hide thumbs Also See for Diga DMR-PWT500:
Table of Contents

Advertisement

U77
Due to the current disc not having authorised copyright
information, video output is not performed.
U88
(When a disc is inserted) Displays when there was
something unusual detected. This is displayed
when the unit is in the recovery process to return
to normal operation. Once the display clears you
can use the unit again.
If it remains displayed, consult the dealer where
the unit was purchased.
U99
The unit fails to operate properly. Press [Í/I] on
the main unit to switch the unit to standby mode.
Now press [Í/I] on the main unit again to turn the
unit on.
H
or F
("∑" stands for a number.)
There is something unusual. (The service number
displayed after H and F depends on the unit's
condition.)
Check the unit using the troubleshooting guide
(
94). If the service number does not disappear,
do the following.
1. Disconnect the plug from the household mains
socket, wait a few seconds, then reconnect it.
2. Press [Í/I] to turn the power on. (The unit may
be fixed.)
If the service number does not disappear despite
after doing the above, request service from the
dealer. Inform the dealer of the service number
when requesting service.
X HOLD
The HOLD function is activated.
Press and hold [OK] and [BACK/RETURN
the same time until "X HOLD" disappears. (
] at
22)
93
VQT3C81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents