Panasonic Diga DMR-PWT500 Operating Instructions Manual page 11

About HDMI cable
≥Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover).
≥When outputting 1080p signal, please use HDMI
Cables 5.0 meters or less.
≥Recommended Panasonic HDMI cable part
number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
≥ The HDMI connection supports VIERA Link "HDAVI
Control" ( 66).
≥ You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display
properly or at all when connecting with a DVI/HDMI
switching cable. (Audio cannot be output.)
≥ If you are connecting to a TV that is only compatible with 2
channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
When the unit is not to be used for a long time
To save power, unplug it from the household mains
socket. This unit consumes a small amount of
power, even when it is turned off
[approx. 0.2 W ("Power Save in Standby" is
activated and "RF OUT ( Aerial Signal )" is set to
"Off")]
11
VQT3C81