Display - Panasonic DMR-PWT635 Operating Instructions Manual

Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
- The disc has copy protection.
- "BD-Video Secondary Audio" is set to
"On". ([BD-V]) (
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
below)
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.

Display

On-Screen Information
Select the time until the channel information
screen ( 25) disappears automatically.
Unit's Display
Changes the brightness of the unit's display.
• If "Automatic" is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When "Quick Start" is set to "Off" or "Timer
Setting for Quick Start" (
this function is fixed to "Automatic".
Screen Saver
This is to prevent burn-in on the screen.
Convenient functions
80), the setting for
75
VQT4L30