Main Unit - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Main unit

1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Disc tray ( 22)
3 Blue LED
≥It is possible to set the LED to turn on/off. (
4 Recording indicator
≥The indicator will light up while recording.
≥The indicator will blink while recording is paused.
5 CALL LED
≥The LED will light up when this unit receives
incoming call etc. of the video communication.
( 65)
6 Remote control signal sensor
–Angle: Approx. 20° up and down, 30° left and
right
–Distance: Within approx. 7 m in front of the unit
7 Open/close disc tray (
8 USB port ( 22)
9 SD card slot ( 22)
: Stop
; Start play
13, 22)
79)
22)
Pull to flip down the
front panel.
< Display
1
HDDSD
BD
6
1 Drive (HDD, BD or SD) indicator
2 SD card slot indicator
3 USB port indicator
4 Copying indicator
5 Disc indicator
6 Remote control signal indicator
7 Main display section indicator
Current time/playback counter, various
messages
8 Playback indicator
9 Timer recording indicator
This indicator lights up when the timer recording
standby is activated.
Rear panel terminals (
2 3 4
COPY
SD USB
PLAY
7 8 9
10, 90)
VQT3C81
5
9