Call Restriction - Panasonic KX-TCD953EB Operating Instructions Manual

Call Restriction

You can restrict desired handset(s)/base unit from dialling selected phone numbers. Phone numbers
beginning with the restricted digits cannot be dialled out. For example, if "00" is assigned as the call
restriction number, international calls cannot be made.
For selected handset(s)/base unit, you can assign up to 6 call restriction numbers (up to 8 digits). Set
the call restricted handset(s)/base unit and the restriction number(s) by programming. The factory
preset is OFF.
1
Press
PROG
2
Press 6 .
3
Enter the base unit password (p. 33).
The current registered handset
number(s)/base unit is/are displayed.
Ex. Handset 1, 2, 3, 4, 5 and 6 are registered.
6O0 I23456
The base unit number is displayed as " 0 ".
4
Enter the desired handset
number(s)/base unit.
The selected handset number(s)/base unit
flash(es).
Ex. Handset 2 and 6 are restricted.
6O0 I23456
If you misdial, press the number(s) again.
5
Press
PROG
" I " is displayed.
6O I -
6
Enter a call restriction number, up to
8 digits.
If you misdial, press
erased from the right. To erase all digits,
press and hold
36
I NT
then .
.
C . The digits are
.
C
7
Press PROG .
A confirmation tone sounds.
" 2 " is displayed. To continue entering a
number, enter the next number, then press
.
PROG
8
Press .
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.
When you dial a restricted number,
the call is disconnected, and the dialled number
flashes.
Ex. The restricted number is "00".
00
To cancel the call restricted
handset(s)
Follow steps 1 to 3, then enter the handset
number(s) you want to cancel. When
finished, press
PROG
handset returns to the stand-by mode.
To cancel the call restriction
number(s)
Follow steps 1 to 4, then select the call
restriction number you want to cancel by
pressing PROG . Then press
finished, press
PROG
handset returns to the stand-by mode.
repeatedly until the
C . When
repeatedly until the