Direct Call; Setting The Direct Call Mode; Dialling The Stored Number - Panasonic KX-TCD953EB Operating Instructions Manual

Direct Call

You can store a number in the direct call memory. This feature allows you to make a call easily by
pressing . Incoming calls are accepted.

Setting the Direct Call Mode

After storing the direct call number, the unit will automatically switch to the direct call mode.
When the direct call mode is on, you can ONLY dial the number stored in the direct call memory.
1
Press
PROG
Press G or F until " F42 " is displayed.
2
3
Press .
OK
F42 -
If the current stored number is the same
as the number you wish to set, skip to step
5.
4
Enter the phone number, up to 24 digits.
If you misdial, press
erased from the right. To erase all digits,
press C
5
Press PROG
A confirmation tone sounds.
The display will return to the stand-by
mode, then "
- i -

Dialling the Stored Number

Make sure that "
The number stored in the direct call memory is dialled automatically.
When the handset is in "direct call" mode emergency calls can not be made until direct call is
cancelled.
34
.
C . The digits are
firmly.
.
" is displayed.
00
" is displayed, then press
To change the direct call number:
Enter the new direct call number in step 4.
To turn OFF the direct call
mode
1
Press .
PROG
Press G or F until " F42 " is displayed.
2
3
Press .
OK
4
Press .
PROG
" " will go out.
.