Using the Caller List
Calling Back from the Caller List
1
Press
PROG
Press F or G.
2
The most recent caller's information is
displayed.
Press G or F until the desired caller
3
number is displayed.
Editing the Caller's Phone Number
You can edit a phone number in the Caller List. After editing the number, you can continue with the
calling back procedure.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
1
Press
PROG
Press F or G.
2
The most recent caller's phone number is
displayed.
Press G or F until the desired
3
number is displayed, and press OK.
The first digit flashes.
0 i2345678
24
I NT
then
.
I NT
then
.
4
Press
.
The displayed phone number is dialed
automatically.
5
To hang up, press
handset on the base unit.
The handset will return to the stand-by
mode.
If a phone number is not displayed in the caller
information, you cannot call back that caller.
4
Add a number to the current number.
Pressing
erases the digit to the left of
C
flashing digit.
To erase all digits, press and hold
5
To call the number, press
or place the
C
.
.