Making Calls - Panasonic KX-TCD953EB Operating Instructions Manual

Making Calls

With the Handset
Make sure that the power is ON (p. 14).
1
Press .
2
Dial a phone number.
The dialled number is displayed.
i2345678
After a few seconds, the display will start
showing the length of the call.
888800 - 00 - 00
3
To hang up, press
handset on the base unit.
The handset will return to the stand-by
mode.
To dial after confirming
the entered number
1
Enter a phone number.
The entered number is displayed.
If you misdial, press
erased from the right.
To cancel, press
2
Press .
After a few seconds, the display will start
showing the length of the call.
3
To hang up, press
handset on the base unit.
The handset will return to the stand-by
mode.
or place the
. Digits are
C
firmly.
C
or place the
If " " flashes and an alarm tone sounds
after pressing
base unit. Then try again.
If busy tones sound after pressing
make a call, the base unit speakerphone or
another handset is in use.
You can choose whether to display the length
of the call or phone number in the talk mode
by programming (p. 38).
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM.
F
While talking, press
the desired level.
Ex. LOW is selected.
After a few seconds, the display will return to
the length of call.
OR
In the stand-by mode, proceed as follows.
1
Press .
PROG
Press G or F until " F6 " is displayed,
2
then press .
OK
The current level is displayed.
Ex. LOW is selected.
F6
F G
3
Press or to select
the desired level.
4
Press PROG .
, move closer to the
to
G
or to select
19