Table of Contents
Advertisement
Settings
Connections
Plug in the AC adaptor and the telephone line cord to the bottom of the unit. Then connect the
cords as shown.
8V
Telephone
Line Cord
* The abbreviation TNV means
"Telephone Network Voltage".
USE ONLY WITH Panasonic AC ADAPTOR KX-TCA11E.
Be careful not to confuse the telephone line jack with the AC adaptor jack on the base unit. If
connected improperly, the base unit will not work and damage may occur.
The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during
use.)
To connect a standard telephone on the same line, see page 57.
If your unit is connected to a PBX which does not support Caller ID services, you cannot access
those services.
CONNECTION OF POWER SUPPLY
This apparatus is intended for use when powered by the KX-TCA9E or KX-TCA11E.
Using other power supplies will invalidate any approval given to this apparatus.
12
9V
AC
Adaptor
Fasten the cords to prevent them
from being disconnected.
Hooks
Telephone Line Cord
TNV*
To Mains Outlet
(AC 230–240V, 50 Hz)
AC Adaptor
To B.T. Socket
Advertisement
Table of Contents
