Setting the Key Tones
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
On the handset
You can choose whether or not the handset
keys will sound tones (key tone, confirmation
tone, error tone). The factory preset is ON.
1
Press
PROG
.
Press G or F until " F2 i " is displayed,
2
then press
OK
.
The current setting is displayed.
1: ON
0: OFF
Ex. ON is selected.
F2
iU
i
Press G or F to select the desired
3
setting.
You can press
0
or ON.
4
Press
PROG
.
If ON is selected, a confirmation tone
sounds. The display will return to the
stand-by mode.
1
or
to select OFF
On the base unit
You can choose whether or not the base unit
keys will sound tones. The factory preset is ON.
1
Press
then
PROG
2
Press
2
then
1
The current setting is displayed.
1: ON
0: OFF
Ex. ON is selected.
2
iU
i
3
To select OFF, press
OR
To select ON, press
4
Press
.
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.
To cancel during programming, press
then start from step 1.
PROG
.
I N T
.
0
.
1
.
17