Table of Contents
Advertisement
Direct Call
You can easily make a call using a stored direct call number by pressing
calls are accepted. To use this feature, store the direct call number and turn on the mode by
programming. The factory preset is OFF.
Setting the Direct Call Number and Mode
After storing the direct call number, the unit will automatically switch to the direct call mode. When the
direct call mode is on, you can ONLY dial the number stored in the direct call memory.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1
Press
.
2
Press
or
to "Setting Handset", then press
.
3
Press
or
to "Call Option", then press
4
Press
or
"Direct Call No.", then press
"<Enter Phone No>" is displayed.
5
Enter the phone number up to 24 digits.
If you misdial, press
erased from the right. To erase all digits,
press and hold
6
Press
.
7
While the arrow is at "Save", press
8
While the arrow is at "ON", press
A beep sounds.
Dialling the Stored Number
Make sure that "
The number stored in the direct call memory is dialled automatically.
46
until the arrow points
until the arrow points
until the arrow points to
. The digits are
C
.
C
" is displayed, then press
9
Press
mode.
The handset is now in the direct call
mode.
B a s e 1
1 0 N e w C a l l s
.
To turn OFF/ON the direct call
.
mode
Follow steps 1 to 3. In step 4, press
until the arrow points to "Direct
ON/OFF", press
select OFF or ON and press
finished, press
.
When set to off, "
.
or
.
or
. Incoming
to return to the standby
. Press
or
. When
.
" will go out.
or
to
Advertisement
Table of Contents
