Panasonic TX-28DT30 Operating Instructions Manual page 9

QUICK START GUIDE
1
Ensure that the VCR is in Standby mode.
Plug the TV into mains socket and switch ON.
Programmes will appear immediately if your dealer
2
has programmed the TV for you.
If the TV has not been programmed for you then
Auto setup will begin.
First, the TV will search for analogue stations:
When the search for analogue stations is complete, the
TV will continue to search for DVB stations.
TV stations will be located, sorted into order and stored
ready for use.
Stations are sorted into the following order:
D DVB Stations:
D Analogue Stations:
The sorted programme order depends upon the TV signal, the broadcasting system, and reception conditions.
Are sorted by their logical channel number.
followed by:
All analogue stations, sorted into channel order.
Mains
Socket
9