Dvb Setup Menu - Panasonic TX-28DT30 Operating Instructions Manual

DVB SETUP MENU

The DVB setup menu provides access to DVB specific options.
Note: If DVB transmissions cannot be received clearly, the DVB setup menu may not be available.
Open the Setup menu
Move to DVB setup
Access DVB Setup menu
Move to your choice
Increase or decrease levels, set
options or access further menus
Press the EXIT button to exit
Signal Quality
Common Interface
Module
Favourites Setup
Preferred Subtitles
System Update
26
The signal quality function displays an
indication of signal quality for each DVB
programme position.
The DVB system requires a good quality
signal to provide the best picture. When
viewing analogue pictures, interference
such as signal reflection from nearby
buildings or mountains
'ghosting', but still provides a viewable
picture. For the DVB system, interference
such as this can disrupt the flow of data
causing the picture to appear to be made
up of large blocks, or to freeze
intermittently. If the picture disappears
completely, this could mean that signal
quality is very poor. If this happens often,
you may need to improve your aerial
system to provide a better signal.
The Common Interface Module menu
provides access to functions contained
on a Common Interface Module inserted
into one of the CI slots. These are located
at the rear of the TV. See page 28.
Allows you to select your favourite
programme positions and display them
as a list in the TV Guide. See page 30
This option allows you to select the
language in which subtitles should
appear (if available)
SUBTITLES button is pressed.
This menu allows you to download new
software to the television. See page 31.
causes
when the