Dvb Timer Programming Menu - Panasonic TX-28DT30 Operating Instructions Manual

DVB TIMER PROGRAMMING MENU

For an external VCR to record DVB programmes, the integrated DVB system must be active to provide the signal.
The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system will
switch on and tune to the correct station (even if the TV is in standby mode). If the VCR is compatible with Q- -Link or similar
technologies (see page 39) you do not need to program the VCR - - the DVB system will control the recording process.
The VCR must be connected to the TV using a SCART cable to record DVB programmes.
Open the Setup menu
Move to DVB Timer
programming
Access DVB Timer
programming
Press the OK button to begin
programming
Select the Programme position
to be recorded
Move to the Date field
Set the Date on which
recording is to take place
The current Date and Time are
shown at the top of the menu.
See page 35 for further Date
options
Move to the Start time field
Set the Start time
Move to the End time field
Set the End time
The duration of the recording is
shown in the Min. column
33