Panasonic TX-28DT30 Operating Instructions Manual page 10

QUICK START GUIDE
3
TV to VCR Download
If a "Q--Link", "
NEXTVIEWLINK"
has been connected to the AV2 socket before
starting Step 1, programme information will be
downloaded to the VCR.
Only the analogue programme positions will be
downloaded to the VCR, in the correct order.
See page 39.
Not all VCRs
programme information, some may require to be
started manually.
Refer to the VCR operating instruction book.
If a VCR other than those described above has
been connected, then there will be no download
operation, the TV is now ready for use:
Notes :
If the VCR has not accepted download data from the TV,
you may need to select the Download option from the
VCR's menu system.
Refer to the VCR operating instruction book.
If Q--Link is not operating correctly, check the following :
D The Scart cable is connected to the TV's AV2 Scart
socket.
D The Scart cable is connected to the VCR's compatible (Q--Link,
D The Scart cable is a "fully wired" type.
For further information on Q--Link and connecting equipment, see pages 39, 46 and 47.
4 Owner ID
As an added feature, this TV has the option of adding a security code (Owner ID) and personal details into its memory,
so that in the unfortunate event of theft it will help the Police to trace the owner.
Enter required 4 digit Owner ID
PIN NUMBER.
(using 0 to 9 on the remote control).
10
or compatible VCR
support this download of
BBC1
NEXTVIEWLINK
TV > VCR DOWNLOAD IN PROGRESS
PLEASE WAIT
PROGRAMME : 48
REMOTE CONTROL UNAVAILABLE
or similar technology) Scart socket.