Tuning Menu -- Owner I.d - Panasonic TX-28DT30 Operating Instructions Manual

TUNING MENU -- OWNER I.D.

Owner I.D. allows you to enter a security code and address information so that in the unfortunate
event of theft it will help the Police to determine the owner.
If the Owner I.D. information was not entered after Auto setup or it is necessary to alter some of the I.D.
Open the Setup menu
Move to Tuning menu
Access Tuning menu
Move to Owner I.D.
Access Owner I.D.
If the Owner I.D. has previously
been set, enter the PIN NUMBER
(using 0 to 9 on the remote control)
followed by OK to proceed, this will
take you to the NAME option
If no Owner I.D. has previously
been set, enter the required 4 digit
Owner I.D. PIN NUMBER (using 0
to 9 on the remote control)
If a 4 digit PIN NUMBER was
entered above, you will be taken
automatically to the NAME line
If not, move to the NAME line
Change character
Select character position
Repeat above until NAME, HOUSE
NUMBER and POSTCODE are
entered
Press OK to store the details.
Press again, to confirm,when
asked, "Are you sure ?"
24
information it can be re--accessed via the Tuning menu.
Return --
For future reference,
write your PIN Number here :