Common Interface Module Menu - Panasonic TX-28DT30 Operating Instructions Manual

COMMON INTERFACE MODULE MENU

The Common Interface Module menu provides access to software contained on Common Interface
Modules. These can be inserted in the "CI1" and "CI2" slots located at the rear of the TV.
IMPORTANT NOTES:
Switch off the TV using the front panel switch before inserting or removing a module.
If you are installing a TV software update, please follow the dedicated instructions supplied with the module.
Insert the CI module as described below:
Inserting a conventional Common Interface Module.
Switch on the TV
Open the Setup menu
Move to DVB setup
Access DVB setup menu
Move to Common Interface
Module
Access Common Interface
Module
28
Some Common Interface Modules may be a two piece design
consisting of a card reader together with the viewing card. When using
this design of card, first insert the card reader firmly into a CI slot on
the TV (flap side to the left).
Secondly, insert the viewing card into the reader.
Viewing card
TV
Insert flap
side to the
left !
Card reader