Tuning Menu -- Shipping Condition - Panasonic TX-28DT30 Operating Instructions Manual

TUNING MENU -- SHIPPING CONDITION

Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations.
This can be done either through the Shipping condition menu or through the Auto setup menu.
The Shipping condition menu will reset all data, clearing all tuning information and resetting all control levels back to factory settings.
You may need to adjust your VCR or programme position '0' VCR after operating the Shipping condition menu -- refer to page 41.
Open the Setup menu
Move to Tuning menu
Access Tuning menu
Move to Shipping condition
Access Shipping condition
Press OK to start
Press again, to confirm, each
time that you are asked, "Are
you sure?"
Switch TV off and wait for a few
seconds.
Switch TV on again.
Auto setup will begin, stations
will be located, sorted and
stored ready for use.
See page 21
Shipping condition
All tuning data will be erased
OK : Start
EXIT : To exit
SETUP : Return to tuning menu
23